The CNC Aluminum Hopup Chamber MXW is precisely machined to perform accurately and consistently on the Wolverine Airsoft MTW Milspec, Forged, Billet and MTW-9 series.

The Hopup Chamber MXW unit is built with an aluminium Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot.

The Hopup Chamber MXW unit is designed to accept the HPA MTW Engine M4 nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BBs during use.

The Hopup Chamber MXW unit is equipped with a self-centering inlet O-ring to ensure the hopup unit is inserted exactly in the center of the 11mm to 11.5mm inner bore HPA Engine nozzle outlet without wobbling. Removable CNC Brass Side Wings slide smoothly into the outer barrel slots, and also included is an advanced CNC Delrin Locking C-Clip to hold the inner barrel tightly in place without wobbling and twisting.

***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!

Package Includes
1 x CNC Aluminum Hopup Chamber MXW unit
2 x CNC Brass 2.6mm Side Wing
1 x CNC Steel Pivot Pin
1 x CNC Aluminum Hopup Lever
1 x CNC Aluminum Soft Flat Nub (4mm)
1 x Steel Nub Spring
1 x CNC Delrin Locking C-Clip
1 x CNC Brass Barrel Spacer
1 x Brass Barrel Spacer Holder Oring
1 x CNC Aluminum Rotary Dial Knob

Specification
Overall Length: 51.15mm
Overall Height: 22mm
Inlet Diameter (to fit into HPA Nozzle Outlet): 11mm to 11.5mm
Hub Outer Diameter (to fit into Outer Barrel): 12mm
Hub Inner Diameter (to fit Nozzle): 7mm
Material: Aluminum 6061

Features
Machined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability
Performs accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series
Precision Rotary Dial Knob for fine hopup adjustments
Re-engineered precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot
Removable Steel Pivot Pin for ease of setup and maintenance
Accepts HPA MTW Engine M4 nozzle length
Fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use
Self-centering inlet O-ring to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore HPA Engine nozzle outlet without wobbling
Removable CNC Brass Side Wings to slide smoothly into the outer barrel slots
Advanced CNC Delrin Locking C-Clip holds the inner barrel tightly in place without wobbling and twisting
Compatible with any 11mm to 11.5mm inner bore HPA Engine nozzle outlets

Compatibilty: most HPA MTW Milspec, Forged, Billet and MTW-9 series

Use proper tools for disassembly and reassembly of the gearbox be careful of the spring tension.
Bearing lubricant oil/grease is recommended for smooth operation